Cost calculator
Asphalt Driveway Cost in Illinois
Illinois installed pricing runs $7.84 to $16.80 per square foot — about 12% above the national average. Enter your driveway size for a local estimate.
Your project
Tight, steep or long-haul sites cost more because the paver and trucks work slower.
Estimated Illinois driveway cost
$3,763 – $8,064
- Area
- 480 sq ft
- Most likely price
- $5,376
- IL price per sq ft
- $7.84 – $16.80
- Asphalt required
- 8.7 tons
- Demolition included
- None
Prices are national planning averages. Asphalt is tied to crude oil and freight costs, so your local quote can land well outside this range. Always confirm with a paving contractor before budgeting. Most Illinois contractors also apply a mobilisation minimum of roughly $2,240.
Asphalt driveway prices in Illinois
A new asphalt driveway in Illinois typically runs $7.84 to $16.80 per square foot installed, with most homeowners landing near $11.20. That puts IL about 12% above the national average.
Chicago-area union labour lifts the state average well above downstate pricing.
A standard two-car driveway of 600 square feet therefore costs roughly $4,704 – $10,080 in Illinois, and a 1,000 square foot driveway roughly $7,840 – $16,800.
Northern Freeze-Thaw build spec for Illinois
Illinois sits in a Northern Freeze-Thaw zone, where the pavement is attacked by deep frost, aggressive de-icing salt and heavy clay subgrade. Deep frost and heavy salt use; 3" surface over 8" base is typical.
That translates into a concrete specification: 8 inches of CA-6 crushed limestone, normally CA-6 crushed limestone, under the asphalt. On the mix side, PG 64-22 binder with a PG 58-28 option for northern counties.
The practical paving season in Illinois is April through October. Plants close outside that window in most of the state, and asphalt placed on frozen or saturated subgrade will not compact properly no matter how good the crew is.
What moves the number most
Three things dominate: demolition of whatever is there now, base depth, and access. Tearing out old concrete adds roughly $3.36 per square foot in Illinois. Difficult access — steep grades, tight gates, hand work around obstacles — adds about 25%.
Thickness matters less than people expect. Going from 2" to 3" of surface course adds only about 8% per inch to the total job, because mobilisation, grading and base are the same either way. It is nearly always worth paying for.
Getting quotes in Illinois
Get three written quotes and make each one state compacted asphalt thickness, base material and base depth, and whether the price includes demolition and haul-off. A quote that only lists a square-foot price is not comparable to one that specifies 3" over 8" of processed gravel.
Book early in the season. Illinois crews fill their schedules fast and late-season work gets rushed into cold weather, which is when compaction problems appear.
Illinois driveway cost by size
Installed price range at $7.84-$16.80 per sq ft, 3" asphalt over base, no demolition.
| Driveway size | Typical dimensions | IL installed cost |
|---|---|---|
| 400 sq ft | 20 x 20 ft — one car | $3,136 – $6,720 |
| 600 sq ft | 20 x 30 ft — two cars | $4,704 – $10,080 |
| 1,000 sq ft | 20 x 50 ft — two cars plus turnaround | $7,840 – $16,800 |
| 1,500 sq ft | 12 x 125 ft — long rural drive | $11,760 – $25,200 |
| 2,500 sq ft | Large drive with parking apron | $19,600 – $42,000 |
Other paving work in Illinois
| Work | IL price per sq ft |
|---|---|
| New asphalt driveway | $7.84 – $16.80 |
| Resurfacing / overlay | $3.36 – $7.84 |
| Tear-out and haul-off | $1.12 – $3.92 |
| Sealcoating (two coats) | $0.17 – $0.39 |
| Recycled asphalt millings | $2.24 – $5.60 |
Frequently asked questions
+How much does an asphalt driveway cost in Illinois?
Between $7.84 and $16.80 per square foot installed, so a typical 600 sq ft two-car driveway runs $4,704 – $10,080. Demolition of an existing surface is extra.
+Is asphalt cheaper than concrete in Illinois?
Yes — asphalt typically costs 40-50% less to install than concrete. Concrete lasts longer with less maintenance, but asphalt is faster to install, easier to repair and far more forgiving of ground movement.
+When is the best time to pave in Illinois?
April through October. Booking early in that window gets you better crews and better compaction weather than a late-season rush job.
+How thick should the gravel base be for a driveway in Illinois?
Because of Illinois's deep frost, aggressive de-icing salt and heavy clay subgrade, contractors here specify 8 inches of CA-6 crushed limestone — typically CA-6 crushed limestone. Skimping on the base is the single most common cause of premature failure in a northern freeze-thaw climate.
+What type of asphalt mix is best for Illinois?
In a Northern Freeze-Thaw zone, the right spec is PG 64-22 binder with a PG 58-28 option for northern counties. Ask any contractor to name the binder grade on the quote — if they cannot, they are buying whatever the plant has running that day.
+What goes wrong with driveways in Illinois?
The local failure driver is deep frost, aggressive de-icing salt and heavy clay subgrade. That shows up as edge cracking and settlement within three to five years when the base is thin or drainage was never graded away from the slab.
+How long will an asphalt driveway last in Illinois?
15-25 years with sealcoating every 3-5 years and prompt crack filling. In a Northern Freeze-Thaw zone, deep frost, aggressive de-icing salt and heavy clay subgrade shortens that to under 10 years if maintenance is skipped.