Cost calculator
Asphalt Driveway Cost in Arizona
Arizona installed pricing runs $6.65 to $14.25 per square foot — about 5% below the national average. Enter your driveway size for a local estimate.
Your project
Tight, steep or long-haul sites cost more because the paver and trucks work slower.
Estimated Arizona driveway cost
$3,192 – $6,840
- Area
- 480 sq ft
- Most likely price
- $4,560
- AZ price per sq ft
- $6.65 – $14.25
- Asphalt required
- 8.7 tons
- Demolition included
- None
Prices are national planning averages. Asphalt is tied to crude oil and freight costs, so your local quote can land well outside this range. Always confirm with a paving contractor before budgeting. Most Arizona contractors also apply a mobilisation minimum of roughly $1,900.
Asphalt driveway prices in Arizona
A new asphalt driveway in Arizona typically runs $6.65 to $14.25 per square foot installed, with most homeowners landing near $9.50. That puts AZ about 5% below the national average.
Cheap year-round paving, but summer heat forces early-morning placement on large jobs.
A standard two-car driveway of 600 square feet therefore costs roughly $3,990 – $8,550 in Arizona, and a 1,000 square foot driveway roughly $6,650 – $14,250.
Arid / Desert build spec for Arizona
Arizona sits in a Arid / Desert zone, where the pavement is attacked by extreme UV oxidation, 115 °F surface temperatures and monsoon scour. No frost heave; UV oxidation is the main failure mode, so sealcoating matters more than base depth.
That translates into a concrete specification: 4 to 6 inches of compacted aggregate base course, normally crushed granite or caliche ABC, under the asphalt. On the mix side, Asphalt-rubber or PG 70-10 mix that resists rutting and UV embrittlement.
The practical paving season in Arizona is Year-round, avoiding midday in July and August. Plants close outside that window in most of the state, and asphalt placed on frozen or saturated subgrade will not compact properly no matter how good the crew is.
What moves the number most
Three things dominate: demolition of whatever is there now, base depth, and access. Tearing out old concrete adds roughly $2.85 per square foot in Arizona. Difficult access — steep grades, tight gates, hand work around obstacles — adds about 25%.
Thickness matters less than people expect. Going from 2" to 3" of surface course adds only about 8% per inch to the total job, because mobilisation, grading and base are the same either way. It is nearly always worth paying for.
Getting quotes in Arizona
Get three written quotes and make each one state compacted asphalt thickness, base material and base depth, and whether the price includes demolition and haul-off. A quote that only lists a square-foot price is not comparable to one that specifies 3" over 8" of processed gravel.
Book early in the season. Arizona crews fill their schedules fast and late-season work gets rushed into cold weather, which is when compaction problems appear.
Arizona driveway cost by size
Installed price range at $6.65-$14.25 per sq ft, 3" asphalt over base, no demolition.
| Driveway size | Typical dimensions | AZ installed cost |
|---|---|---|
| 400 sq ft | 20 x 20 ft — one car | $2,660 – $5,700 |
| 600 sq ft | 20 x 30 ft — two cars | $3,990 – $8,550 |
| 1,000 sq ft | 20 x 50 ft — two cars plus turnaround | $6,650 – $14,250 |
| 1,500 sq ft | 12 x 125 ft — long rural drive | $9,975 – $21,375 |
| 2,500 sq ft | Large drive with parking apron | $16,625 – $35,625 |
Other paving work in Arizona
| Work | AZ price per sq ft |
|---|---|
| New asphalt driveway | $6.65 – $14.25 |
| Resurfacing / overlay | $2.85 – $6.65 |
| Tear-out and haul-off | $0.95 – $3.33 |
| Sealcoating (two coats) | $0.14 – $0.33 |
| Recycled asphalt millings | $1.90 – $4.75 |
Frequently asked questions
+How much does an asphalt driveway cost in Arizona?
Between $6.65 and $14.25 per square foot installed, so a typical 600 sq ft two-car driveway runs $3,990 – $8,550. Demolition of an existing surface is extra.
+Is asphalt cheaper than concrete in Arizona?
Yes — asphalt typically costs 40-50% less to install than concrete. Concrete lasts longer with less maintenance, but asphalt is faster to install, easier to repair and far more forgiving of ground movement.
+When is the best time to pave in Arizona?
Year-round, avoiding midday in July and August. Booking early in that window gets you better crews and better compaction weather than a late-season rush job.
+How thick should the gravel base be for a driveway in Arizona?
Because of Arizona's extreme UV oxidation, 115 °F surface temperatures and monsoon scour, contractors here specify 4 to 6 inches of compacted aggregate base course — typically crushed granite or caliche ABC. Skimping on the base is the single most common cause of premature failure in a arid / desert climate.
+What type of asphalt mix is best for Arizona?
In a Arid / Desert zone, the right spec is Asphalt-rubber or PG 70-10 mix that resists rutting and UV embrittlement. Ask any contractor to name the binder grade on the quote — if they cannot, they are buying whatever the plant has running that day.
+What goes wrong with driveways in Arizona?
The local failure driver is extreme UV oxidation, 115 °F surface temperatures and monsoon scour. That shows up as edge cracking and settlement within three to five years when the base is thin or drainage was never graded away from the slab.
+How long will an asphalt driveway last in Arizona?
15-25 years with sealcoating every 3-5 years and prompt crack filling. In a Arid / Desert zone, extreme UV oxidation, 115 °F surface temperatures and monsoon scour shortens that to under 10 years if maintenance is skipped.