Cost calculator

Mississippi paver patio cost calculator

Paver installations in Mississippi run $12 to $25 per square foot installed, against a national midpoint of $20. The lowest labour rates in the country make Mississippi the cheapest state to pave.

Interlocking concrete pavers being set on screeded bedding sand over a compacted base, with a retaining wall and paver pallets on site
Pavers are the visible fifth of a hardscape order. The base, bedding sand and edging under them carry most of the tonnage and most of the cost.

Your project

Tumbled, permeable and large-format units carry a material premium.

Typical Mississippi installed cost

$8,102

480 sq ft · $17 per sq ft

Low estimate
$5,672
High estimate
$12,154
Mississippi cost factor
84% of national
Base depth required
4" compacted
Materials share (~45%)
$3,646
Labour share (~40%)
$3,241
Base and prep (~15%)
$1,215

No frost, but soft alluvial soils need proper base compaction. Paving season in Mississippi is typically Year-round, weather permitting. Figures are planning estimates — get three local quotes before committing.

The shareable link reopens this calculator with your exact inputs.

What drives paver cost in Mississippi

The lowest labour rates in the country make Mississippi the cheapest state to pave. That puts Mississippi at roughly 84% of the national installed average for segmental paving.

Mississippi sits in a Southern Heat zone, where paving is attacked by soft alluvial soils, high humidity and long hot summers. Locally that means 6 inches of crushed limestone or soil-cement of imported crushed limestone or stabilised soil-cement under a patio, and more under a driveway. That specification difference is a real line item: every extra inch of compacted base adds material, machine time and haul-off of the spoil it displaces.

Labour is about 40% of a paver job — far more than asphalt, which is machine-placed. That is why paver pricing tracks local wage rates much more closely than asphalt pricing does, and why the spread between states is wider here.

How to read a paver quote

A complete quote names the base depth, the bedding sand type, the joint sand product and the edge restraint. If any of those four are missing, the contractor has room to cut the part of the job you cannot see once the pavers are down.

Compare quotes on base depth first. A $17 per square foot quote with 8 inches of compacted base is cheaper over ten years than a $14 quote with 3 inches, because the second one gets rebuilt.

Hardscape costs across Mississippi

Pricing inside Mississippi is not uniform. The paver and hardscape market is set by the metro areas — Jackson, Gulfport and Hattiesburg — where crew wages, disposal fees and permit costs all run above the state average. Rural counties in Mississippi typically come in 10 to 20 percent below the metro figure on material-led work, and rather more than that on labour-led work, though long haul distances can claw some of it back.

Contractors working in Mississippi are licensed or registered through the Mississippi State Board of Contractors. Before you sign anything, look the company up there and confirm the licence is current, then confirm liability insurance and workers' compensation directly with the insurer named on the certificate. A licence lookup takes two minutes and is the single most useful check a homeowner can make.

Residential work over $50,000 requires a state licence; coastal counties add wind and drainage review.

What a paver patio costs in each part of Mississippi

Inside Mississippi, Jackson is the market that sets the top of the range — crews there carry higher wages, disposal fees and permit costs, so a Jackson job typically lands around 8 percent above the statewide figure. Work the same job out into rural Mississippi and you can expect roughly 14 percent below it, provided the site is not a long haul from the nearest supply yard. Haul distance is the one thing that can reverse the discount entirely: past about 30 miles the truck time starts to eat the saving.

Quotes inside one metro still vary by 30 to 40 percent between contractors for the same scope, which is why the range above is a range. The cheap quote is usually cheap for a stated reason — thinner base, no compaction testing, no haul-off, or a crew squeezing you in at the end of the season. Ask each bidder to price the same written specification and the spread narrows dramatically.

Repair, relay or rebuild in Mississippi

Pavers rarely need replacing — they need lifting and relaying. Settling, a dipped area by the downspout or a wavy edge are base problems, and the units themselves come up clean and go back down. Lift, re-base and relay runs about $7.60 to $13.50 per square foot in Mississippi, against $11.82 to $25.32 for a new installation, and you keep the pavers.

That is the structural advantage over poured concrete and the reason a paver patio in Mississippi survives soft alluvial soils, high humidity and long hot summers: the joints move instead of cracking. Budget for re-sanding the joints every few years — at $0.76 to $1.69 per square foot it is the cheapest thing you will ever do to protect the installation, because open joints are how the bedding sand washes out and the settling starts.

How Mississippi compares with neighbouring states

Mississippi prices at or below every state it borders on the same specification, so there is nothing to gain by looking for a crew from across the line.

Do not let the border tempt you past the licensing question. Whoever you hire must be licensed or registered to work in Mississippi specifically — the Mississippi State Board of Contractors is where you check that, and a licence in the neighbouring state does not carry over.

Mississippi paver cost by project size

Installed, standard concrete pavers, patio base depth.

ProjectAreaLowTypicalHigh
Small patio (10 × 12)120 sq ft$1,418$2,026$3,038
Standard patio (16 × 20)320 sq ft$3,782$5,402$8,102
Large patio (20 × 30)600 sq ft$7,092$10,128$15,192
Single driveway (12 × 40)480 sq ft$7,292$10,533$16,205
Double driveway (20 × 40)800 sq ft$12,154$17,555$27,008

Mississippi paver patio cost by metro area

Metro figures are the statewide installed range scaled by local labour, disposal and permit costs. Planning estimates, not quotes.

MarketInstalled per sq ft600 sq ft1,000 sq ft
Jackson metro$12.77 – $27.35$7,659 – $16,407$12,766 – $27,346
Gulfport metro$12.41 – $26.59$7,447 – $15,952$12,411 – $26,586
Hattiesburg metro$12.17 – $26.08$7,305 – $15,648$12,175 – $26,080
Rural Mississippi$10.17 – $21.78$6,099 – $13,065$10,165 – $21,775

Mississippi repair and maintenance prices

MS rates for work on an existing surface, before any mobilisation minimum.

JobUnitMS price
Re-level a settled areaper sq ft$5.06 – $10.13
Replace cracked or stained unitsper sq ft$7.60 – $15.19
Re-sand joints with polymeric sandper sq ft$0.76 – $1.69
Seal the surfaceper sq ft$0.59 – $1.35
Lift, re-base and relayper sq ft$7.60 – $13.50
Full tear-out and new patioper sq ft$11.82 – $25.32

Paver cost in states bordering Mississippi

Installed price per square foot, same specification, at each state's own rate.

StateInstalled per sq ft600 sq ft job
Louisiana$13.50 – $28.92$8,100 – $17,352
Arkansas$11.98 – $25.68$7,188 – $15,408
Tennessee$12.66 – $27.12$7,596 – $16,272
Alabama$12.32 – $26.40$7,392 – $15,840

Frequently asked questions

+How much does a paver patio cost in Mississippi?

Between $12 and $25 per square foot installed, with most homeowners landing near $17. A typical 320 square foot patio therefore runs about $5,402.

+Are paver driveways more expensive in Mississippi?

Yes — $15 to $34 per square foot, because vehicles require 8 inches of compacted base instead of 4, and 80 mm pavers instead of 60 mm.

+When is the best time to install pavers in Mississippi?

Year-round, weather permitting. No frost, but soft alluvial soils need proper base compaction. Booking outside peak season often gets you a better rate, since crews price scarcity in the middle of the season.

+Are pavers cheaper than an asphalt driveway?

No. Asphalt installs at a fraction of the square-foot cost, but pavers last 25-50 years against 15-20 for asphalt and individual units can be lifted and reset. Over the full lifecycle the gap narrows considerably.

+What is not included in a typical quote?

Demolition of an existing surface, drainage work, permits, retaining or step work, and lighting. Add demolition above to see how it moves the total.

+How deep should the paver base be in Mississippi?

Plan on 6 inches of crushed limestone or soil-cement of imported crushed limestone or stabilised soil-cement for a patio, and add a further two to four inches for a driveway. Mississippi's soft alluvial soils, high humidity and long hot summers punishes shallow bases faster than anything else on the job.

+Do pavers handle Mississippi's climate better than asphalt?

In a Southern Heat zone, generally yes. Segmental paving flexes with ground movement instead of cracking, and individual units can be lifted and reset where soft alluvial soils, high humidity and long hot summers has caused settlement.

+How accurate are these numbers?

They are national averages adjusted by a Mississippi labour and material factor, not quotes. Site access, slope, soil condition and pattern complexity each move the real number by 10% or more.

+Do I need a licensed hardscape contractor in Mississippi?

The Mississippi State Board of Contractors handles contractor licensing or registration for Mississippi. Check the licence is current in the official register, and ask for a certificate of insurance naming you before work starts.

+Do I need a permit in Mississippi?

Residential work over $50,000 requires a state licence; coastal counties add wind and drainage review.

+Are prices different across Mississippi?

Yes. Jackson, Gulfport and Hattiesburg set the top of the range because labour, disposal and permit costs are highest there. Rural parts of Mississippi typically run 10 to 20 percent below those figures, unless the site is a long haul from the nearest plant or supply yard.

+How much does a paver patio cost in Jackson?

Around $12.77 to $27.35 per square foot installed, so a 600 square foot job in Jackson runs roughly $7,659 – $16,407. Jackson sits above the Mississippi statewide average on labour, disposal and permit costs.

+Can a settled paver patio in Mississippi be repaired rather than replaced?

Almost always. Lifting the affected area, correcting the base and relaying the same units costs about $7.60 to $13.50 per square foot in Mississippi, well under the $11.82 to $25.32 of a new installation, and the pavers are reused.

+What does paver repair cost in Mississippi?

Re-levelling a settled area costs $5.06 to $10.13 per square foot in Mississippi and re-sanding joints $0.76 to $1.69. Most contractors apply a minimum call-out, so bundle the work.

+Are Mississippi prices different in rural areas?

Yes — rural Mississippi typically runs around 14 percent below the metro figure, roughly $10.17 to $21.78 per square foot installed. Long haul distance from the nearest supply yard can cancel that saving out.